Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Setpoint adjustment by external programming device (pilot wire)
In this mode, it is possible to modify the setpoint in progress. This modified setting is valid until
any change is made through order by the Pilot wire.
The icon
shows means that a new setting of the setpoint is in progress.
In this way the adjustment follows the settings made through the pilot wire.
1. Pilot wire order
2. Pilot wire order
3. Pilot wire order
4. Pilot wire order
5. Pilot wire order
6. Pilot wire order
In case of absence of a pilot wire, this mode follows the comfort setpoint.
Time adjustment
There are two ways to set the time (see configuration mode). A mode called "without calendar"
and another called "with calendar". Calendar mode (enabled by default) allows you to manage the
summer / winter time change.
Time setting with calendar (default mode)
1.
Push the
key.
2.
Set the hours using the
3.
Set the minutes using the
4.
Set the year using the
5.
Set the month using the
6.
Set the day using the
00
00
00
00
00
00
and
keys and and validate with
and
keys and and validate with
00
1
00
and
keys and and validate with
and
keys and and validate with
and
keys and and validate with
[ 35 ]
1
00
2
3
00
00
COMFORT (19 °C)
ECO (15,5 °C)
ECO (18 °C)
ECO (17 °C)
FROST-FREE (7 °C)
STAND-BY
2
3
3
.
.
.
.
.
Publicidad
Tabla de contenido
