Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Programmation
Program setting
These programs are scheduled setpoint. This type of programmed heating consists in defining 7
time slots maximum per day, each of which may have a different adjustable setpoint level by the
user, in steps of 0.5°C in the range from 7°C to 30°C. The maximum value depends by the setting
made in the configuration mode, 28°C by default.
Example:
16°C
0.00
1.
Press the
mode.
2.
Press and hold the
3.
Set the temperature of your first program step (0h00) using the
confirm through
4.
Set the time of your second program step then validate with
perature and confirm by
5.
Press
to go to the next day. Or hold for 3 seconds
setting on the following day.
Program reading function
It is possible to view the programs.
1.
Press the
2.
Press the
same key will enable you to modify the program.
3.
Press the
key function
The
key is used to switch on or off the product no matter which operating mode is selected.
Switching off is also a priority in all menus adjustment or configuration.
If a stop is made during the modification of a data and that this data was not memorized before
switching the product off, this modified data is not recorded.
When switching off the product, a sound (three beeps) is emitted. When handing over in opera-
tion of the product another sound (one beep) is emitted.
19°C
18°C
6.00
8.00
key twice from normal mode or once if you are already in the clock setting
key for 3 seconds until the temperature flashes.
.
to go to the third step. And so on (maximum 7 slots in a day).
key from the normal mode (direct access after the clock setting).
key to browse the different program steps. A long press (3 seconds) on the
to display the days of the week.
20°C
18°C
11.00 13.00
17.00
[ 37 ]
20°C
16°C
23.00
and
keys and then
, then the requested tem-
if you want copy this day
Publicidad
Tabla de contenido
