Automatic Reset; Factory Settings; Technical Features - DELTACALOR Kompact Manual De Usuario Y De Instalación

Automatic reset

User
You can access this function by pressing simultaneously for more than 5 seconds the key
and the key.
This press sequence resets the values of the following parameters to the factory settings.
So, meaning:
• The comfort setpoint at 19°C.
• Lowering to 3.5°C, or 15.5°C.
• The Frost free setpoint at 7°C.
• Active window detection.

Factory settings

This function is accessed by pressing simultaneous for more than 30 seconds the key and the
key.
This press sequence resets the values of all the parameters accessible through the menus confi-
guration or adjustment, to values factory default, including program P1.

TECHNICAL FEATURES

• Power supply: 230 V - 50 Hz
• Standby consumption: 2 VA
• Pilot wire input 6 orders
• 230V ~ CPL input optional
• Maximum output power: 1800 W
• Control of the electrical resistance by triac at zero voltage.
• Protection index: IP24
• Protection class: Class II
• Operating temperature: 0 ° C to 50 ° C
• Storage temperature: 0 ° C to 50 ° C
• Full proportional electronic regulation.
• Local programming by setpoint level
Manufacturer: DELTACALOR s.r.l
Instruction manual available on the site:
https://www.deltacalor.com/en/download/
The symbol placed on the device indicates the obligation to dispose of the device by entrusting
to a specialized selective collection center, in accordance with Directive 2012/19 / EU. If the
device needs to be replaced, it can be returned to the dealer. This device does not belong to the
category of ordinary household waste. By eliminating it correctly you participate in protecting the
environment and limiting the exploitation of natural resources.
Declaration of conformity: The manufacturer declares, under his exclusive responsibility,
that the product concerned by this manual conforms to the prescriptions of the
Low Voltage Directives 2014/35 / EU, EMC 2014/30 / EU and RoHS 2011/65 / EU.
[ 42 ]