DELTACALOR Kompact Manual De Usuario Y De Instalación página 41

Open window detection
The indication of this choice is displayed by the selection of the number "5" located on the left of
the display (vertical scale of figures, 1 to 7).
Validation of the default function
The selection and deselection of the function is done by pressing further the "+" key. The indica-
tion of this choice is achieved by the presence of the open window icon if the function is confir-
med. Press the key "OK" validates the selection.
– Radiator power calibration
The indication of this choice is displayed by the selection of the number "6" located to the left of
the display (vertical scale of numbers, 1 to 7). On the digit block present on the display, indicate in
W the power of the radiator. This adjustment is carried out by the
key to decrease. Confirmation by the "OK" key.
If value "0000" there will be no display of the energy consumption. By default the power is 1350 W.
Example:
– Calendar function
The indication of this choice is displayed by the selection of the number "7" located to the left of
the display (vertical scale of numbers, 1 to 7).
The selection and deselection of the function is done by pressing further the
tion of this choice is achieved by the presence of the calendar icon if the function is authorized.
Pressing the key validates the selection. Pressing the
the programming mode and return to the mode preceding the entry.
NOTE - The length of time before the backlight turns off is not adjustable by the user. Default
fixed time is 60 seconds.
– CPL function
This function is not active.
Press once the
00
00
00
00
00
00
key to exit "Configuration Mode".
key again, will let you exit from
[ 41 ]
key to increase and by the
00
00
00
00
00
00
key. The indica-