Final Adjustments; Maintenance - SRAM ROCK SHOX X Loc Full Sprint Manual Del Usuario

F i n a l A d j u s t m e n t s
1. Spray isopropyl alcohol on the rear shock, rear hose, remote, front hose, and fork, and clean
them with a rag.
2. Rotate the remote to the desired position. Use a torque wrench with a T25 TORX® bit socket
to tighten the remote clamp bolt to 5-6 N∙m (43-52 in-lb).
3. Turn the gate adjuster to the desired position.
4. Fasten the hose to the frame according to the frame manufacturer's instructions.
M a i n t e n a n c e
The Connectamajig™ can only be connected 3 times before you must bleed your remote.
Press the remote actuator to the lockout position before disconnecting the Connectamajig,
otherwise fluid will spray from the hose.
16

Final adjustments

C A u T i o N - E Y E H A z A R d
Buzzy's Slick Honey® is a registered trademark of Quality Bicycle Products