Descargar Imprimir esta página

lamber DSP26-ADD Manual Del Usuario página 18

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

First Section - FOR THE USER
WORKING AND USE
The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water;
The objects to be washed should be correctly arranged for a good washing-up result;
We suggest to descale dishes, from time to time, in order to remove calcareous and/or star chy sediments by soaking it
in suitable solutions suggested by your cleansing agent supplier.
If you need to buy new dishes remember the follow ing: Dis hes and cups: preference must be given to china or non-
porous pottery articles, with smooth surface. Glasses: choose a glass suitable to be w ashed in dish-washing machines.
Surfaces must be smooth and bottoms the least concave possible.
OPERATION BEFORE WORKING
B
EFORE STARTING THE W
:
THAT
-
the cock is open;
-
the
filters
and
the overflow are in
their
housings;
-
the wash arm and the rinse arm are
pivot;
-
brightener and washing powder dispenser
containers are loaded.
- Make sure the front door is closed (as regards DSP5
model, make sure the hood is completely down).
- Be sure that the outer general feeding switch is off.
T
:
HEN PROCEED
Turn the machine on by using the w all sw itch
1
-
and push the sw itch "A" on the control panel (DIS.1).
The green lamp "G" lights up and the machine loads
automatically (with closed Door) (T he lamp "F" is
flashing quickly).
Once the loading has been co mpleted, the green lamp
"F" is flashing slow ly : it indicates that the machine
ready to start the washing cycle.
-
If you put it in by hand, pour the detergent onto
2
the pump suction filter in the tank
(ask the detergent supplier for measuring!).
ORKING OPERATION BE SURE
free to
If the machine is provided w ith automatic devices for
measuring the additional li quid detergent, check that
there is product in the containers
-
3
Put the dishes into the baskets after having
carefully removed any solid and fat waste. Leave cutlery
to soak previously and dishes too, if necessary, in case
they are going to be w ashed long after having been
used. Do not overload baske ts, dishes do not have to
be placed one on another, w ater must be able to cover
any side of the dishes.
In order to
place dishes properly , see the special
paragraph.
WASHING
-
4
Put the basket into the machine.
Close the door and push the button "B".
(NB: as regards DSP5 model, the cycle starts when the
hood is closed).
The lamp "F" stays ON without blinking and it indicates
that the cycle has begun.
The cycle will start for 2 minutes, including, besides the
washing, a five seconds
is
seconds (23 seconds for machines
softener) with clean water at 85°-90°C will start.
Once the cy cle has ended, the
blinking.
-
At the end of the cycle open the door and pull
5
out the basket.
18
ENGLISH
.
stop and the rinsing
of 18
with Water
lamp "F" restarts

Publicidad

loading

Este manual también es adecuado para:

Dsp3-addDsp4-addDsp26-add-psDsp3-add-psDsp4-add-ps