Publicidad
Idiomas disponibles
Idiomas disponibles
DESCALING
When hard water is used you can find, inside the machine and also on dishes, calcareous sediments which
must be removed both for hygienic and operating reasons by a descaling operation.
Operating process and frequency of this intervention are suggested by your cleansing agent supplier who
has suitable products, generally containing phosphoric acid.
In order to avoid damage to the machine do not
increase the quantities and once operations end rinse
abundantly.
SANIFICATION
At last each 30 days it would be useful to do th
is operation which guarantees
the complete hygienic
conditions of the machine. We suggest to contact your cleansing agent supplier who will give you quantity
and name of the most suitable product you can use and that, generally, is an active chloride powder (100-
200 ppm).
In order to avoid damage to the machine do not
increase the quantities and once operations end, rinse
abundantly.
USEFUL HINTS OF STAINLESS STEEL MAINTENANCE
Stainless steel is so called because it is not affected by oxidation,this is due to a thin molecular layer of oxide
on the surface which protects againts further oxidation. There are, howevwr, substances which can modify or
destroy this layer,giving rise to corrosion:besides preventing the protective film of oxide from reforming,these
substances corrode the stainless steel itself and can cause irreparable dam age. It is therefore necessary to
prevent this by choosing correct cleaning products
and by complying with the following simple
recommendations:never forget that when using these appliances,the first and fundamental rule is to
guarantee that the cleaning products are both non-toxic and hygienic.
Before using any detergent to clean either the stainl ess steel or the immediate and sorrounding floor area,
always ask your supplier for the most suitable product which does not cause corrosion on the steel itself; the
onset of rust is most commonly caused by the use of
unsuitable cleaning materials (strongly acid chlorate
based detergents) or on inadequate maintenance.
Our appliances are made of stainless steel AISI 304 (18-10 type) for exterior panelling,upper tops,tanks etc.
Comply with the following instructions when cleaning and servicing parts in stainless steel.
Ordinary daily maintenance
Carefully and frequently clean the surfaces using a damp cloth; use soap and water or normal detergents,so
long as these do not contain abrasives or chlorine based substances such as sodium hypochlorite
(bleech),hydrochloric acid or other such soluti ons:These products quickly and irreparably corrode stainless
steel. When cleaning floors underneath or near the appli ances, never use the above mentioned products as
vapours or splashes could subject the steel to similar destructive effects.
Only ever rub in the direction of the satining, then thoroughly rinse with clean water and carefully dry.
Rust : water supply pipes, inevitably convey particles of
rust dissolved in the water especially in new
installation plants or when taps are opened after a per
iod of inactivity. These iron deposits must not be
allowed to remain on the stainless steel since they produce rust by contamination.
Use suitable products to remove any
rust marks,from companies which produce detergents for industrial
use. After application, thoroughly rinse with
clean water, neutralizing the action of the product with an
alkaline detergent normally used to clean such appliances or with another specific product.
DO NOT USE METAL MATS TO CLEAN THE STAINLESS STEEL
21
Publicidad
