Running A Program - J.P. SELECTA 4002841 Manual De Instrucciones

INSTRUCTION MANUAL CODE 80196 REV B
Parameters shortening:
Bo: «Boiling» time
Ri: «Rinsing» time
Re: Solvent recovery time.
T: Temperature.
Program number 0
This program is only for check-
ing purposes. It is not possible to
change any parameter on it.
Program 0 parameters:
Bo: 10m
Ri: 10m
Re: 10m
T: 100ºC
J
.P. SELECTA s.a.u.
October 2019
PROGRAMMING
Prog NAME
2 XXXXXXXXX
Prog
2 FA TXXXXXX
DIETHILIC ETHER
Bo Ri Re t
10 10 10 140
PROGRAMMING
Working with different temperatures
In order to avoid dangerous situations, the DET GRAS N sets automatically the extrac-
tion temperature for any solvent, it can not be modified.
(The most used solvents have been taken into account)
This avoids the dangerous to work at temperatures near to auto ignition solvent point.
However, if you need to change this temperature it can be changed.
To do it, when the solvent list is showed select the last one: "FREE"

5.3 Running a program

Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta @jpselecta.es - website: http://www.jpselecta.es
(It can be modified without notice)
Press ENTER to
return to previous
step.

Use keys
to select the program
to edit.

Use the keys
NAME
to entry 9 characters for
the name.

Use the keys
to choice
the solvent.

Use the keys
to set the times for each
step.

CAUTION
FIRE HAZARD
Be sure that you are using a program suitable
to the solvent used on the extraction
CAUTION
FIRE HAZARD
Do not forget to open the coolant tap water
before starting a program

 
  Use the key
to edit the
following character.
 
  Use the key
to edit the
following step.
Tel 34 937 700 877 Fax 34 937 702 362
Page: 29

