Installation Guide - AO Smith AO-WH-PRE El Manual Del Propietario

INSTALLATION GUIDE

1
Turn off main water supply.
Drain water from water lines.
3
Wrap Teflon
®
Screw firmly into filter head.
(See Figure 1)
Do not use pipe solvent (dope), as solvents in some types of pipe dope may cause
damage to plastic fittings. Do not over-tighten to prevent damage to filter head.
4
Loosely fit shut-off valves on both sides to calculate proper spacing of
components. Measure distance and mark pipe accordingly.
(See Figure 2)
tape (2-1⁄2 wraps) around the 3/4" male x 3/4" street adaptor.
ENSURE PROPER SPACING
2
Remove opaque housing from filter
head and set aside.
FIGURE 1
FIGURE 2
NEED HELP? GIVE US A CALL 877.333.7108
3