When Using Infant Carrier Without Base - CYBEX ATON Manual Del Propietário

When using Infant Carrier without Base

Adjust the seat angle until the
Infant Carrier is level with the ground.
If you are having trouble achieving the proper recline
angle:
1. Uninstall Infant Carrier.
2. Place a tightly rolled towel or pool noodle
under the Infant Carrier, where indicated.
3. Continue installation.
Adjusting the Recline Angle
RED Level Line on the
Line MUST be level
with ground when
installed without
Base
Line MUST be level
with ground when
installed without
Base
37