Harbor Breeze ECHOLAKE 00876 Manual Del Usuario página 8

FINAL INSTALLATION
11. Place glass (J) on the preassembled pipe on light kit
(I) until it is flush with the preassembled metal disk.
Secure with previously removed bowl cap (L) and finial
(M). Tighten securely.
12. Attach fan pull chain extension (BB) and light pull
chain extension (CC).
Assembly is now complete.
Hardware Used
Fan pull chain extensions
BB
CC Light pull chain extensions
13. To install the fan WITHOUT the light, remove the
hex nut and washer preassembled inside the switch
housing cover of the light kit (I) and detach the
switch housing cover.
11
J
L
M
12
BB
x
1
CC
x
1
13
Hex Nut
Switch
housing
cover
Washer
Lowes.com/harborbreeze
14
FINAL INSTALLATION
14. Place the plug (GG) into the center hole of the
switch housing cover.
I
15. Remove and save the three preassembled screws
from the switch housing cover. Attach switch housing
cover to the bottom of the motor housing (H) by
aligning the holes in each part and re-installing the
previously removed screws. Tighten securely.
16. Attach fan pull chain extension (BB).
I
14
Switch
housing
cover
GG
15
Screw
16
Fan pull chain
BB
Lowes.com/harborbreeze
15
I
H
I
H