Scott MHLM 16 Manual Del Usuario página 7

GOGGLE CARE AND FIT
It is absolutely essential that the goggles worn with all off-road helmets are always
clean and the lens is replaced regularly. See the manufacturer's instructions supplied
with your chosen goggle type. Before purchasing your goggles, ensure the goggles fit
your helmet correctly and that they do not interfere with your vision and allow the max-
imum peripheral vision. We recommend SCOTT Goggles for all SCOTT Helmets. SCOTT
Sports SA shall not be liable for any damages and losses due to not complying goggles.
REMOVING INNER LINER AND CHEEK PADS
To remove the cheek pads, gently pull the padding off from the three snap buttons
holding it in place and pull out the retaining flap from underneath the lower helmet
beading. Repeat on the other side. To remove the liner, unsnap the rear portion of the
inner located towards the rear of the helmet. Gently pull out the liner without forcing
the liner out from its front clips located at the top portion of the visor opening. Reverse
the steps to reinstall liner.
• V. CLEANING YOUR HELMET
Do not use any solvents, hot water, glass cleaners, or gasoline to clean your helmet.
These materials can cause severe damage to the helmet and weaken its structur-
al integrity. Any such damage to the helmet can prevent the helmet from perform-
ing properly in the event of an accident which could result in serious injury or death.
To clean your helmet, it is best to use lukewarm water with a damp soft cloth. Rinse
off and dry using a soft cloth. Clean your visor with warm water and rinse well. Do not
use any cleaners or solvents to clean your visor as they may damage the coating of the
visor . SCOTT helmets come with a removable liner to make the cleaning and upkeep
of your helmet interior easy and hassle free. Remove the liner and cheek pads and
hand wash with normal detergent in cold water. Let them air dry. Do not use a wash-
ing machine or tumble dry. Hand wash and air dry only. For more cheek pad and lin-
er sizing, to maximize comfort, please check with your local dealer for liner/cheek pad
sizing options. SCOTT Sports SA shall not be liable for any damages and losses due to
improper cleaning.
DO NOT MODIFY YOUR HELMET
It is extremely dangerous to modify your helmet by drilling holes, cutting the shell and/
or absorption liner. Any such actions will weaken the helmet and may cause serious
injury in the event of an accident. Removing any parts such as, vents, liners, cheek pads,
mouth guards, rubber trimming, etc. before use will also disrupt the intended design of
the helmet and may expose you to severe injury or death in the event of an accident.
Do not paint your helmet as the chemicals of the paint may adversely affect the mate-
rials used in your helmet, thereby weakening it. SCOTT Sports SA shall not be liable for
any damages and losses due to improper modifications.
DO NOT MISSUE YOUR HELMET
Riding with your helmet hanging from the helmet holder, exposing your helmet to
extreme heat sources, using your helmet as a stool/chair, throwing your helmet, spray-
ing your helmet with chemicals (such as insecticide/insect repellant) or hanging your
helmets from your mirrors or any other angled support that can cause the helmet to
fall, are all ways in which you can cause serious damage to your helmet. These types of
misuse will reduce your helmet's ability to protect you properly in the event of an acci-
dent. Make sure your helmet is in proper working condition before every use. Always
check your helmet for loose screws, cracks, faulty visor, etc. prior to every use. Be sure
that the liners and cheek pads are all properly in place and that the chin strap system is
secure. SCOTT Sports SA shall not be liable for any damages and losses due to improp-
er use.
7 - ENGLISH