press
to review older calls. The CALL# will increase.
After you view the oldest data in memory, the display will show END
oF LIST.
If the data in memory is being reviewed for the first time, the NEW icon
will be lit.
The NEW CALL LED will turn off if you review the data.
If no key is pressed within 20 seconds, the display will display the
total call counter, new call counter, current time and date.
1. Select the required Caller ID memory location by using the
button.
2. To delete single memory, press DELETE button once. The display
will show the DELETE?. press DELETE button for 2 seconds. The
data for that call will be erased, and the CALL# and Caller ID
information will be updated.
To delete all entire memory, press and hold DELETE button until
the display shows DELETE ALL?. press DELETE for 2 seconds until
No CALLS appears on the display. Both the total call and new call
counters will become zero, and the current time and date will be
displayed.
Call Back (Redial) From The Caller ID Memory
With the handset hung up on the base.
1. Select the required Caller ID memory location by pressing
.
2. press DIAL button, the speakerphone will on automatically and
dial the selected number.
Lift the handset or press the
memory location by pressing
Note: If the Caller ID number is 10 digits, press DIAL button once,
the unit will insert "1" before the Caller ID number automatically.
You can press
the speakerphone will turn on automatically and dial the display
number.
Erase The Caller ID Memory
button to select insert "1" or not. press DIAL again,
-oR-
-oR-
button, select the required Caller ID
or
, then press DIAL button.
16 – ENGLISH
or
or