V2 ALFARISS Manual Del Usuario página 69

AUTOMATION DEVICE USERS MANUAL
AUTOMATION DEVICE USER INFORMATION
An automation system is a great convenience, in addition to a valid security system, and with just a little, simple care, it is made to last
for years.
Even if your automation device meets all the safety standards, this does not exclude the presence of residual risk, i.e. the possibility that
hazardous situations may be created, usually due to irresponsible or even improper use, and for this reason we wish to offer some advice
regarding the behaviour to be adopted in order to avoid problems:
Prior to using the automation device for the first time, ask the installer to explain the sources of residual risk to you, and take some
time to read the instruction manual and user information delivered by the installer.
Keep the manual for any future doubts and give it to any new owners of the device.
Your automation device is a machine that faithfully follows your commands; irresponsible and improper use can make it become
hazardous: do not start movement of the device if there are people, animals or objects within its radius of action.
Children: installed in accordance with technical regulations, an automation system guarantees a high level of safety.
However, it is prudent to prevent children from playing near the automation device and to avoid unintentional use; never leave the
remote control within the reach of children: it is not a toy!
Anomalies: as soon as the automation device shows any anomalous behaviour, remove the electricity supply and perform manual
unblocking. Do not attempt any repairs yourself, but ask your installer: in the meantime, the system can operate as a non-automated
device.
Maintenance: as with all machinery, your automation devices requires periodic maintenance so that it may continue to work for as long
as possible, and in complete safety. Agree a periodic maintenance plan with your installer; V2 SpA recommends a maintenance plan to
be performed every 6 months for normal domestic use, but this period may vary depending on the intensity of use.
Any inspection, maintenance or repairs should only be performed by qualified personnel. Even if you think you know how, do not
modify the system and the automation device programming and adjustment parameters: your installer is responsible for this.
Final testing, periodic maintenance and any repairs should be documented by those performing the operations, and the documents held
by the system owner.
Disposal: on completion of the device's operating life, ensure that disposal is performed by qualified personnel and that the materials
are recycled or disposed of in accordance with valid local regulations.
Important: If your device is fitted with a radio control, the function of which appears to deteriorate over time, or has even ceased to
function, this might simply depend on the batteries being run down (depending on the type, this may be from several months to up to
two/three years). Before contacting your installer, try replacing the battery with the battery from another, working transmitter: if this was
the cause of the problem, then simply replace the battery with another of the same type.
Are you satisfied? Should you wish to add another automation device to your home, contact the same installer and ask for a V2 SpA
product: we guarantee you the most advanced products on the market and maximum compatibility with existing automation devices.
Thank you for having read these recommendations, and for any present or future needs, we ask you to contact your installer in full
confidence.
3.5 - MOTOR OVERRIDING SYSTEM
In case of absence of current, the gate can be released by
operating on the motor:
1. Open the hatch of the lock J in front of the motor
2. Insert the key K in the lock and turn clockwise to open the
hatch of the release on the side
3. Insert the key L into the hole and turn clockwise until reached
the limit switch
To restore the automation, proceed as follows:
1. Turn the key L anticlockwise until reached the limit switch,
then draw it out
2. Turn the key K anticlockwise closing the hatch of the lock,
then draw it out
3. Close the lock with the hatch J
67