Before The First Use - Domo DO7348H Manual De Instrucciones

Calentador cerámico
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 27
PARTS
1.
Air outlet grille
2.
Air intake grille
3.
Handle
4.
Mode knob
5.
Temperature knob
6.
Indicator light
7.
Cover for the air intake
Removable filter
8.

BEFORE THE FIRST USE

The heater should only be operated at a minimum distance of 50 cm from any wall or other object that
·
could disturb its operation.
Position the air flow in order to optimise the heating of the room. Avoid corners, small volumes, floors
·
and ceilings.
·
Place the appliance on a smooth, stable surface.
When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure
·
sufficient ventilation. This smell will disappear very quickly.
USE
Set the temperature knob to MIN and the mode knob to 0. Plug the power cord into a socket. Turn the
knobs to the desired position. A red indicator light indicates that the unit is switched on.
TEMPERATURE KNOB
Turn this knob to the desired position between MIN and MAX.
MODE KNOB
You can set the unit to high or low power, with or without oscillation.
The higher the wattage, the faster the space will be heated.
The unit works at its highest power (1500 W) with oscillation. The unit will
1
disperse heat from left to right and vice versa.
2
The unit operates at its lowest power (1000 W) with oscillation. The unit will
disperse heat from left to right and vice versa.
3
Turn the knob to this position to turn the power off.
4
The unit operates at its lowest power (1000 W).
The unit operates at its highest power (1500 W).
5
Turn the temperature knob back to MIN and the mode knob to 0 to turn off the unit. Pull the plug out of
the socket.
www.domo-elektro.be
4
5
6
1
3
2
8
3
2
1
DO7348H
7
4
5
23

Publicidad

Tabla de contenido
loading

Tabla de contenido