Before The First Use - Domo DO7325F Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
PARTS
1.
Air outlet grille
2.
Air intake grille
3.
Handle
4.
Indicator light
5.
Mode knob
6.
Temperature knob

BEFORE THE FIRST USE

·
The heater should only be operated at a minimum distance of 50 cm from any wall or other object that
could disturb its operation.
·
Position the air flow in order to optimise the heating of the room. Avoid corners, small volumes, floors
and ceilings.
·
Place the appliance on a smooth, stable surface.
·
When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure
sufficient ventilation. This smell will disappear very quickly.
USE
1.
Place the appliance on a smooth, stable surface. Make sure the buttons are set to MIN or OFF. Plug
the power cord into a socket.
2.
Turn the mode dial to one of the following settings:
·
FAN: ventilation without heating
·
LOW: heating 1200 W
·
HI: heating 2000 W
The higher the wattage, the faster the space will be heated.
3.
Turn the temperature control knob to the desired position between MIN and MAX. The more you
turn the knob to MAX, the warmer the air will blow. The indicator light will illuminate to indicate that
the unit is in operation.
4.
Turn the mode dial to OFF and the temperature knob to MIN. The indicator light goes out to indicate
that the unit is switched off. Then unplug the device. Allow the unit to cool down completely before
storing it.
SAFETY DEVICES
·
This heater is protected with an overheat protection that switches off the heater automatically in case
of overheat, e.g. due to the total or partial obstruction of the grids. The overheating shut-off switches
off the temperature inside when the appliance exceeds the normal running temperature. The heating
element will automatically stop working, the motor will continue to operate, the internal heat shed.
This protective device applies only to the appliance itself and has no influence on room temperature
regulation. In this case, unplug the appliance, wait about 10 minutes for it to cool and remove the
www.domo-elektro.be
1
3
2
5
6
4
DO7325F
21

Publicidad

Tabla de contenido
loading

Tabla de contenido