Menus; Access To Menus; Direct Access With Button Combinations; Table 10: Access To Menus - DAB PUMPS PWM 203 Instrucciones De Instalación Y Mantenimiento

When pressed for a longer interval, buttons +/- enable automatic increase/decrease of the selected parameter. If button +/- is
pressed for more than 3 seconds, the automatic increase/decrease speed is increased.
When the button + or – is pressed, the selected value is modified and saved immediately on the permanent memory
(EEprom). Unit shutdown in this phase, even if inadvertent, does not cause loss of the set parameter.
The SET button is only used to exit the current menu and is not used to save any changes. Only in some special
cases described in 6 some values are implemented by pressing "SET" or "MODE"
3.1

Menus

The complete structure of all menus and relative items is shown in Table 11.
3.2

Access to menus

There are two ways to access the various menus from the main menu:
1)

Direct access with button combinations

2) Access by name via drop-down menus
3.2.1 Direct access with button combinations
The menu is accessed directly by pressing the relative combination of buttons simultaneously (for example MODE SET to enter the
Setpoint menu) and the MODE button can be used to scroll through the various items.
Table 10 shows the menus accessible via button combinations.
MENU NAME
User
Monitor
Setpoint
Manual
Installer
Technical assistance
Restore default
settings
Reset
ENGLISH
DIRECT ACCESS BUTTONS

Table 10: Access to menus

83
PRESS-AND-HOLD
TIME
On release of button
2 Sec
2 Sec
5 Sec
5 Sec
5 Sec
2 Sec on power-up of unit
2 Sec