Descargar Imprimir esta página

KTM Power Parts 77112945044 Manual Del Usuario página 13

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3
2
4
8
- Remove the stator (1) incl. the ignition pulse generator (2) from the origi-
nal ignition cover.
1
2
- Insert the retaining bracket (3) (included) in the new ignition cover (inclu-
ded).
- Insert the stator (1) into the ignition cover, turn clockwise until the stator
engages and route the stator cable (4)under the retaining bracket.
- Tighten the stator (4Nm, Loctite243).
- Mount the ignition pulse generator (2) in the new ignition cover (4Nm,
Loctite648).
5
6
- Beginning from the inside, insert the cable (5) into the guide (6) provided
for this purpose.
- Press the gasket (7) into the ignition cover.
7
1
- Remove the screw plug (8) of the original ignition cover and mount in the
new ignition cover.
5
- Mount the ignition cover.
NOTE:
Position the stator cable (5) behind the slave cylinder of the clutch (9).
9
Route the cable neatly and without bends and tie it with cable binders.
- Insert the torque limiter (10) (included).
10
13

Publicidad

loading