Introduction; Design; Versions - Inepro PayMatic AD2400 Manual De Instrucciones

Introduction

®
The PayMatic standard control board design includes a minimum of functionality. The functionality of
®
the PayMatic can be expanded by means of additional "ECOS" ® software modules. Thus, it is
® ®
possible to produce perfectly customised PayMatics . PayMatic outputs have two neutral relay points
®
to control a connected device over a certain programmable length of time. This PayMatic is
programmed in a user-optimised way by means of two control keys. With its potted electronics and its
®
extensibility by means of "ECOS" ® software modules the PayMatic is a very special timer of its kind.
® : Electronic Customised Option System
"ECOS"
Read this manual carefully to guarantee faultless operation.

Design

* Very resistant plastic housing
* Suitable for external installation
* Two operating buttons: Up and Down
* Bright green 2-digit LED display
* Extensibility by means of ECOS software modules
* Supply voltage either 24 Volt or 240 Volt

Versions

® ®
There are two types of PayMatic available as the functioning of the PayMatic mainly depends on the
additional software modules and the settings. The difference between the two types of timer is in the
design of the mechanical coin selector. Both types of coin selector accept 1 type of coin or token only.
®
PayMatic AD2400(-B) Version 2.0 5-11-2007 12
- www.inepro.com -