Approved Power Tool Attachments - Stihl HL 100 Manual De Instrucciones

!
Warning!
Never repair damaged cutting attach-
ments by welding, straightening or
modifying the shape. This may cause
parts of the cutting tool to come off and
result in serious or fatal injuries.
Keep the cutting tool sharp. Tighten all
nuts, bolts and screws, except the
carburetor adjustment screws, after
each use.
Store the power tool in a dry and high or
locked location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter "Storing the machine" in this
manual.
HL 100
Approved Power Tool
Attachments
HL 0-90°
HL 0°
HL 30°
BC 35
HT
FCS
KW
STIHL power tool attachments are
available for converting the single
purpose unit into other power tool
combinations.
.
Power tool
attachment
1) 4)
BC 35
FH
2)4)
FCS
1) 4)
FH
2) 3)
HL 0°
1)
HL 0-90°
1)
HL 135°
2) 3) 4)
HT
2) 4)
KW
1)
Loop handle with barrier bar
required
2)
Barrier bar not necessary on loop
handle
3)
Loop handle is not necessary
4)
Must not be mounted to versions
with short drive tube (HL 100 K,
HL 75 K)
English / USA
Application
Cultivator
Power edger
Power scythe
Hedge cutter
Hedge cutter
Hedge cutter
Pole pruner
PowerSweep
13