Gima m27322 Manual De Instrucciones página 10

- Warranty - One year limited warranty.
- Durable.
The product or its components cannot be used for usages different to the ones specified in the present
manual.
Plug in device only into a properly installed socket.
Do not dip it into water! Before cleaning always pull out plug from the socket.
When removing lead connectors, grasping them by the plug D, not the cord F.
Don't expose to excessive amounts of moisture. Don't leave in direct sunlight for extended periods of
time.
Don't drop or hit against other objects. Treat is as you would other sophisticated electronic devices
such as a calculator or recorder.
Flex F has to be examined regularly for damages.
Do not use device if damages are detected. Go to an expert electrician.
Avoid precarious repairs. Repairs shall be carried out with original spare parts only, which
shall be installed according to the intended use.
Always remember that packing elements (paper, cellophane, stitches, adhesive tape, etc.)
can cut and/or hurt if they are not carefully handled.
They shall be removed with adequate means and shall not be left at the mercy of irresponsible
persons; the same is valid for tools used to remove packages (scissors, knives, etc.).
After opening the packages, first of all it is necessary to check all pieces and parts composing the
product. Check that they are all present and in perfect conditions.
To be sure your test results are accurate you must follow the guidelines listed below as exactily as
possible to be sure that you will consistently obtain the most valid and reliable results possible
with your BT-905 instrument.
1. Meals. Wait at least 5 hours after a meal before performing the test.
2. Hydration. Do not consume large amounts of water just prior to testing. (Some medications-
particularly diuretics-may also affect test results).
3. Coffee. Do not drink coffee for 4 hours before testing. Coffee is a diuretic and may affect the
hydration level of your body.
4. Alcohol. Do not drink alcoholic beverages for 24 hours pripor to testing. Alcohol is a diuretic.
In your bloodstream, it also conducts electricity in such a way as to interfere with an accurate test.
5. Exercise. Don not test your body composition for a least 12 hours after exercise. (This is
becauseexercise has a significant effect on your body's water content).
6. Weight. Check your weight on a reliable pair of scales immediately before testing. This is
particularly important for those who tend to be quite lean. The scientific formulas used to accurately
calculate your percents of lean and fat are dependent on an accurate scale weight. Even using yesterday's
weight is not close enough to assure a valid test.
Just before the test cleanse your skin using a washcloth with soap and water, cleanse the areas where
you will be placing the sensor pads G. Scrub the areas until the skin becomes pink but not sor or
irritated. This will remove all dead skin, perspiration, and any excess oils that could prevent good
contact with the sensor pads G. Dry the skin with a clean cloth.
PRESCRIPTIONS
UNPACKING
GETTING YOURSELF READY FOR TESTING
10