Mounting Instructions; Electrical Connection (See - FEIN Power Tools Slugger GX75USA Manual Del Usuario

GX75.book Seite 10 Donnerstag, 22. März 2012 7:16 07
en
10

4. Mounting instructions.

Before any work on the machine itself, pull the power plug from the socket outlet.
WARNING
Assemble the undercarriage as shown. (Figure 3)
Place the machine on the floor with the top side facing down and mount the undercarriage
according to the figure and instructions on the DVD. (Figure 4)
Fasten the undercarriage to the ground with suitable anchor/screw connections. The fastening
must be suitable to withstand the forces occurring during working.
Due to the danger of accidents, this work must be carried out by persons that
WARNING
are physically capable of lifting the high weight of the machine.
Fig. 3
5. Electrical connection (see appendix).
Hazardous Voltage
WARNING
Contact may cause electric shock or burn.
The machine is not equipped with a mains plug and must be connected to the power supply. The
electrical connection, which is to be provided by customer, must be carried out by a qualified elec-
trician.
Observe mains voltage: The mains voltage and the frequency of the power source must agree
with the data on the type plate of the machine.
Before starting operation for the first time, check the rotation direction of the motor. The
rotation direction may be changed only by a qualified electrician.
Tension lever,
undercarriage
Fig. 4
Under-
carriage
Tension lever,
undercarriage
Screw