Maintenance; Service; Cleaning; Warranty And Liability - FEIN Power Tools Slugger GX75USA Manual Del Usuario

GX75.book Seite 16 Donnerstag, 22. März 2012 7:16 07
en
16

10. Maintenance.

Hazardous Voltage
WARNING
Contact may cause electric shock or
burn.
Pull out the mains plug for mainte-
nance and repair! Switching the
machine on unintentionally can lead
to serious injuries.

10.1 Service.

Have maintenance carried out
WARNING
only through qualified person-
nel. Incorrectly mounted leads and components
can cause serious injuries. Have the required
service carried out only through a Slugger
customer service agent.
For repairs, we recommend our Slugger cus-
tomer service centre, the Slugger authorised
service centres and Slugger agencies.
When the machine's power cable is
damaged, it must be replaced by a quali-
fied person using a specially prepared power
cable, available from your Slugger customer
service agent.

11. Warranty and liability.

The warranty for the product is valid in
accordance with the legal regulations in the
country where it is marketed.

12. Environmental protection, disposal.

The machine should be sorted for environment-friendly recycling in accordance with national
laws.
Further information can be obtained from your specialist dealer.

10.2 Cleaning.

Prior to any cleaning or mainte-
WARNING
nance, disconnect the machine
from the power supply in order to avoid acci-
dents. It is best to clean the machine with dry
compressed air. When cleaning machines with
compressed air, always wear safety goggles.
Cooling-air openings and operating elements
must be clean and may not be obstructed
through other objects. Do not attempt to
clean the openings with pointed objects.
Carry out the following maintenance regu-
larly:
Blow out the ventilation slots at the
motor housing and the marked locations
with compressed air (see Instruction
label).
Lubricate the machine daily (when in
use) with machine oil at the locations
marked (see Instruction label).
Check the drive wheel and the contact
wheel for wear and damage each time
when changing the grinding belt. Have
damaged parts replaced.