Selecting A Zone And Channel / Group Id - Kenwood TK-7180 Manual De Instrucciones

S Z
ELECTING A ONE AND
Select the desired zone using the keys programmed as Zone Up and Zone
Down.
• The default setting for the
• The default setting for the
Select the desired channel or group ID using the keys programmed as CH/GID
Up and CH/GID Down.
• The default setting for the <B key is CH/GID Down.
• The default setting for the C> key is CH/GID Up.
Names can be programmed for zones and channels/ group with up to 12
(TK-X180/ TK-X180H) or 8 (TK-X182/ TK-X182H) characters each. However, to
fit on the display, names will be abbreviated. Your dealer can set the zone name
to a length of 0 to 12 digits (TK-X180/ TK-X180H) or 0 to 8 digits (TK-X182/
TK-X182H). Channel/ group ID names will shorten appropriately, to fit in the
display.
For example, if the channel/ group ID name is "–CH1–" and the zone name is
"KENWOOD", and your dealer sets the zone name to 3-digits, the following
display will appear:
10
C / G
HANNEL ROUP
key is Zone Up.
key is Zone Down.
TK-7180/ TK-7180H/ TK-8180/ TK-8180H Display
TK-7182/ TK-7182H/ TK-8182/ TK-8182H Display
ID