camera's flash synch speed. This flash mode and
the required manual partial light output level are
set on the mecablitz by way of the menu control
(please refer to the operating instructions for the
mecablitz).
3.5 E-TTL-HSS flash control
E-TTL-HSS flash control prmits the mecablitz
54 MZ-... and SCA 3102 to be used in the E-TTL
mode even at shutter speeds faster than the
camera's flash synch speed. This mode is set on
the mecablitz by way of the menu control (please
refer to the operating instructions for the
mecablitz).
3.6 Auto flash mode A
A sensor inside the mecablitz controls the light
output in auto flash mode "A": When the amount of
light required for correct exposure has been
reached, the mecablitz electronics automatically
cut off the flash. The correct exposure indication
"ok" appears on the mecablitz. For auto flash
mode, the mecablitz must be set to "A".
mecablitz 60 CT-4, 45 CL-4, 32 MZ-3, 32 Z-2:
Set on the mecablitz an auto working aperture that
suits the prevailing shooting conditions: Take the
shooting distance into account and use the
aperture calculator on the mecablitz to determine
the auto working aperture!
In the camera modes "Av" (aperture priority mode)
or "M" (manual mode) the aperture selected on the
mecablitz must be manually set on the camera.
mecablitz 40 MZ-..., 44 MZ-2, 50 MZ-5,
16