Metz Canon SCA 3102 M3 Manual Del Usuario página 21

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

accessory). The AF emitter integrated in the SCA
3000A takes over the AF measuring beam function.
mecablitz 32 Z-2, 32 MZ-3, 40 MZ-... , 44 MZ-2
with "SCA 3008A" cable:
The above flash units can be operated with the
SCA 3008A for off-camera flash. The AF emitter
integrated in the SCA 3008A takes over the AF
measuring beam function.
6. Maximum flash range indication
Only possible with the mecablitz 40 MZ-...,
44 MZ-2, 50 MZ-5, 54 MZ-... and 70 MZ-... (flash
units with LC-display).
The camera transmits to the flash unit the data
relating to the speed of the loaded film (ISO), the
aperture, the focal length of the lens and the
adjusted exposure correction. The flash unit
computes the corresponding maximum flash range
on the basis of the camera data and its own guide
number. The selected aperture and the
corresponding working range (minimum and
maximum flash-to-subject distance) are indicated
on the flash unit's LC-display.
Note:
The maximum flash range is not indicated on the
flash unit's LC-display when the reflector is
swivelled or tilted.
mecablitz 40 MZ-... and 50 MZ-5:
When the "ISO" button is pressed, the film speed
transmitted by the camera is displayed. With the
EOS 100 series and the EOS 5, however, the
displayed value can deviate from the film speed set
21

Publicidad

Tabla de contenido
loading

Tabla de contenido