Switch On And Shoot - Problem-Free Flash Photography With Your Canon Eos Camera And A Mecablitz - Metz Canon SCA 3102 M3 Manual Del Usuario

on the mecablitz 44 MZ-2:
• Use your fingernail to press up the locking lever
in the middle of the mecablitz side and hold it
depressed (when using an SCA 3002 adapter you
must first open the flap on the rear of the
adapter) and, ...
• at the same time, withdraw the SCA adapter or
standard foot backward.
on the camera:
Screw the knurled nut of the adapter as far as possible
towards the head of the adapter case. The locking pin
in the adapter shoe is now fully retracted into the case.
Slide the adapter into the camera's accessory shoe.
Screw the adapter's knurled nut as far as possible
towards the camera case to clamp the adapter in
position. If the camera does not have a locking hole the
spring-loaded locking pin retracts into the adapter
case so that it does not damage the surface.
2. Switch on and shoot – Problem-free
flash photography with your Canon EOS
camera and a mecablitz
You no longer have to first study many pages of
lengthy operating instructions before taking flash
shots with your mecablitz in combination with the
SCA 3102 adapter and a Canon EOS camera. The
following brief introduction will quickly enable you
to shoot brilliant flash pictures with the utmost
convenience.
View of the SCA 3102 adapter:
The switches are concealed behind a cover that
can be opened with a fingernail. They are not
6