Troubleshooting - GYS GYSFLASH 3.48 PL Manual De Usario

Translation of the original manual
• Estimated charge time :
Charging current
Battery capacity
6 Ah
Charge timing 0% >90%
2 h
*Lead-acid battery equivalent: A lithium battery has better starting performance (CCA) than a lead battery. This is why some lithium battery manu-
facturers provide the battery lead-acid equivalent (EqPb) that indicates the capacity of a lead-acid battery with the same starting performance. For
instance, a LFP battery of 10 Ah will have the same starting performance as a lead-acid battery of around 30 Ah.
• Protections :
The GYSFLASH 3.48PL has several features to protect it against short-circuits or polarity inversions. It has an anti-
spark feature which prevents sparks whilst connecting the device to the battery. This charger has double insulation
and is safe to use with the battery in situ as it will protect the vehicle's on-board electronics.
The GYSFlash 3.48PL is fitted with an integrated temperature probe that ensures that the charging current is adapted to the
ambient temperature, for an optimal charging performance.
TROUBLESHOOTING, CAUSES, SOLUTIONS

Troubleshooting

1
The indicator blinks rapidly
2
The indicator blinks slowly
3
The indicator is on.
The indicator stays on even after
4
pressing button.
5
The indicator flashes.
6
the indicator stays on.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
GYSFLASH 3.48 PL
Lead-acid
3 A
20 Ah 40 Ah 60 Ah
(9Ah EqPb*)
6 h 13 h 20 h
"• Polarity reversal
• Battery voltage is too high
• Clamps in short-circuit"
Battery out of order or very low voltage. Replace the battery.
Failure during charging, battery not
recoverable.
Thermal protection
Charger in sleep mode
Charge interrupted by pressing
Lithium
8 A
3Ah 25Ah
(75Ah EqPb*)
1 h 8 h
Causes
• Check that the clamps are connected correctly
• Check that the selected voltage matches the
battery voltage.
Change the battery and press
charge.
Ambient temperature is too high (>50°C), cool
the room down and let the charger cool down.
Press button
charger to exit sleep mode.
Press
40Ah 60Ah
(120Ah EqPb*) (180Ah EqPb*)
13 h 20 h
Solutions
to restart a
or connect a battery to the
again to restart the charge.
EN
11 11