Shorten The Operator Arm - LiftMaster CSW24U Guia De Instalacion

Shorten the Operator Arm

1
Take the operator arm apart and remove the inner sleeves
from the outer tubing.
Put the arm back together and adjust the arm to the measurements as shown. Use the set screws on the arm to temporarily hold the arm
3
in place while determining the correct measurements.
STEP 2
TOP VIEW OF OPERATOR AND GATE
Set screw
25-1/2"
2
(cut)
10"
(cut)
4"
Cut the outer tubing of the operator arm sections to the
lengths shown.
Set screw
23"
LONG ARM SECTION
(cut)
22" 4"
SHORT ARM SECTION
20"