ELVIE Pump Instrucciones De Uso página 11

3. Using Elvie Pump
3.5 Changing the Bottle
Elvie Pump will automatically pause when the Bottle is full, indicated by the Bottle Light.
You must empty the Bottle before resuming your session.
Press the Bottle Release to separate the full Bottle from the Hub.
Replace the full Bottle with an empty Bottle or pour your
expressed milk into a container of your choice and continue
with the same Bottle. Click the empty Bottle on to the Hub.
3.6 Ending your session
1. Press Play / Pause to stop pumping.
2. Unclip your bra and use your finger to break the seal around your nipple to avoid nipple damage.
3. Remove Elvie Pump from your bra.
4. Press Power to switch off.
3.7 Cleaning
Clean washable components after each use as advised.
3.8 Storing your milk
You may store your expressed milk in the Bottle using the Lid provided (both are fridge and freezer
safe). Always make sure you remove the Bottle from the Hub before storing.
3.9 How to store Elvie Pump
Short-term storage
Between sessions, please store your Elvie Pump out of direct sunlight and ensure the washable
parts are dry. Keep out of reach of children. Recharge immediately after finishing your pumping
session if the Battery Light is on.
Long-term storage
Please use the Charging Cable provided to charge Elvie Pump before long-term storage and store
out of direct sunlight. These measures will increase the lifespan of your Elvie Pump. When removing
from storage, plug the Charging Cable into your Elvie Pump and fully charge for approximately two
hours.
The washable parts will require cleaning and drying before long-term storage and should be stored
out of direct sunlight to avoid discoloration.
Bottle Release
11