•
Elvie Pump uses Bluetooth technology. Please follow airline rules for the use of portable
electronic devices when flying. Furthermore, high altitudes, including while in a pressurized
aircraft cabin, will affect the performance of Elvie Pump
•
Always break the seal around your nipple before removing Elvie Pump from your breast
•
Do not pump until after giving birth as breast pumping can induce labor
•
Portable and mobile frequency communications equipment can affect the breast pump
•
Only use Elvie Pump for its intended use as described in this manual
6.2
Precautions
•
Elvie Pump will not work when connected to the charger; always disconnect Elvie Pump from
the charger and close port
•
Always ensure all parts are completely dry before assembling
•
Do not place the Hub in the fridge or freezer
•
Contact your healthcare professional if you express minimal or no milk, or if expression is painful
•
For assistance with correct Breast Shield sizing and comfort, please see section 2.4 or talk to a
lactation consultant or breastfeeding specialist
•
Discontinue use if you notice a loss of power or if the fully charged battery lasts for less than
two hours of continuous use. The battery is not replaceable
•
Wash your hands thoroughly with soap and water before touching Elvie Pump, its components
or your breasts, and avoid touching the inside of the Bottle or Lid
•
Only use drinking-quality tap water or bottled water for cleaning components that come into
contact with milk
•
Do not use harsh chemicals to clean the Breast Shield, Bottle, Valve, Spout or Seal
•
If stored at minimum or maximum storage temperatures (see section 5.2), when removing
from storage, please allow 24 hours for the pump to reach normal operating temperatures
before use
•
Do not expose Elvie Pump or its components to direct sunlight
Note: Please visit elvie.com for the full list of troubleshooting including Alerts,
warnings and factory reset for Elvie Pump
16