Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
RIM OR DECK MOUNT
INSTALLATION
1-1/8" D. (2.9cm)
1-13/16"
(4.6cm)
1/4"
(6mm)
TO 2-1/8"
(5.4cm)
3/4" (1.9cm)
MAX.
I.D.
RIM OR
DECK
8" Min. (20.3CM)
MOUNT
5/8" O.D. (1.6cm)
5/8" I.D.
SUPPLIED BY
(1.6cm)
INSTALLER
ROUGH + FINISHED
DECK MOUNT INSTALLATION
1. Prepare the Site
Install or relocate the water supplies as needed.
Protect the surfaces of the bath/deck during installation.
Ensure that holes drilled into the deck are not oversized. The spout
and valves require adequate base material strength and maximum
contact area with the deck.
Plaster guard diameters are approximately 1–5/8" (4.1cm) for the
valves and 7/8" (2.2cm) for the spout.
NOTE: Reinforcing material may be required if the deck or rim is
thin. Install before proceeding.
NOTE: For installations to be covered with tile, the tile thickness
must not exceed 1–1/4" (3.2cm).
1017937-2-A
6-3/4"
(17.1cm)
2-13/16" D.
(7.1cm)
5" (12.7cm)
1-1/4"
(3.2cm)
7/8" D.
(2.2cm)
3" (7.6cm)
4-11/16"
(11.9cm)
2-3/8" D. (6cm)
TRADITIONAL
4
7" (17.8cm)
1/4" (6mm) TO
1-1/4" (3.2cm)
MAX. FINISHED
DECK
2-1/8" (5.4cm) MAX.
ROUGH DECK
2-7/8" (7.3cm)
4-5/8"
(11.7cm)
2-3/8" D. (6cm)
SCULPTED
Kohler Co.
Publicidad
Tabla de contenido
