Kit Assembly - Metra 99-9227 Instrucciones De Instalación

ISO DIN radio provisions
1. Mount the pocket to the radio
brackets with (4) #8 x 3/8"
Phillips screws supplied.
(Figure A)
2. Mount the bracket/pocket
assembly to the housing trim panel
with (4) included #8 screws
(Figure B)
3. Slide the radio into radio brackets
and secure with screws supplied
with the radio. (Figure C)
4. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
5. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
(Figure C)
99-9227
DDIN radio provisions
1. Attach the brackets to the radio
housing trim panel using (4)
#8 x 3/8" screws supplied.
(Figure A)
2. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
3
(Figure A)
(Figure B)