Electrical Connection - Santos 60 Manual De Utilización Y De Mantenimiento

RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE
NOTE:

ELECTRICAL CONNECTION:

CARE:
CARE:
98160 06/2006
The packaging material should be disposed of or recycled in accordance
with regulations in force.
In accordance with directive 2002/96/CE (DEEE) – Professional
Appliances section -
When professional equipment is permanently taken out of service, it is
recommended that the electrical power lead at the base of the appliance
is cut off so as to render the equipment unusable. For the disposal or
recycling of the appliance components, please refer to a specialist
company or contact SANTOS.
1. Never operate the machine without coffee beans in the
bean container, or without the bean container itself.
2. Do not use this machine for grinding anything other than
roasted coffee beans.
3. Remove from the coffee beans any foreign bodies which
may damage the grindstones (metal staples, stones, etc.).
• The electric power supply for the machine is available in 2 single-
phase voltages:
-110-120 V 50/60 Hz: 60V1 model
-220-240 V 50/60 Hz: 60 model
Line protection: the machine should be connected to a standard 2-pole +
earth electric socket. The system should be fitted with an RCD and a fuse
rated at 16A. The appliance must be earthed.
• Before connecting the machine, check that the mains electrical voltage is
the same as the voltage for your machine. This value is given (fig. M):
either on the identification plate (16) under the machine.
or on the identification plate on the last page of this manual.
• If the power cable (10) is damaged, it should be replaced by a special
assembly available from approved SANTOS dealers or from SANTOS.
Check that the On / Off switch (11) is in the 0 position before
connecting the power cable plug (10) to your mains electric power socket
(fig. A and fig. M).
16
www.santos.fr