Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Dodge Dakota
1997-2000
1. Unclip the entire dash trim bezel. (Figure A)
2. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
3. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A)
(Figure B)
Dash Disassembly
Dodge Daytona
1990-1993
1. Pull out on the dash trim bezel and remove.
(Figure A)
2. Remove (2) screws from each side of the lower
console (this will allow easier radio removal).
3. Remove (2) screws securing the factory head unit
and disconnect the wiring.
4. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A)
(Figure B)
18
Dodge Durango
1997-2000
1. Unclip the entire dash trim bezel. (Figure A)
2. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
3. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A)
(Figure B)
Publicidad
Tabla de contenido
