Jeep Cherokee 1997-2001; Jeep Grand Cherokee 1993-1995; Jeep Grand Cherokee 1996-1998 - Metra AT-512CR Instrucciones De Instalación

Jeep Cherokee
1997-2001
1. Unclip the dash trim bezel. (Figure A)
2. Remove (2) #10 hex-head screws securing the
factory head unit and disconnect the wiring.
3. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)
Dash Disassembly
Jeep Grand Cherokee
1993-1995
1. Remove (2) Phillips screws from the bottom of the
dash trim bezel. (Figure A)
2. Remove (2) Phillips screws above the radio
opening. (Figure A)
3. Remove (2) Phillips screws to the left of the
steering column. (Figure A)
4. Remove (1) Phillips screw to the right of the
steering column.
5. Unclip the dash trim bezel and disconnect the wiring.
6. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)
23
Jeep Grand Cherokee
1996-1998
1. Unsnap the climate control/wiper control trim panel
and remove. (Figure A)
2. Remove (5) Phillips screws from the top of the
radio/instrument cluster trim bezel.
3. Remove (4) Phillips screws from the bottom of the
radio/instrument cluster trim bezel.
4. Pry out on the bottom edge of the bezel and remove.
5. Remove (2) 3/8" hex-head screws securing the
factory head unit and disconnect the wiring.
6. Cut and remove all mounting tabs on the radio
housing EXCEPT shaded tabs. (Figure B)
Continue to kit assembly, page 25
(Figure A) (Figure B)