Dodge Viper 2003-2006 - Metra AT-512CR Instrucciones De Instalación

1. Using a small flat blade screw
driver, pry up on center console
trim panel (be careful not to
scratch the trim panel). (Figure A)
2. Loosen the shifter lock nut below
center console trim panel (Figure
A) and unscrew the shifter knob.
(Figure B)
3. Unplug electrical connectors and
remove center console trim panel.
(Figure C)
Dash Disassembly

Dodge Viper 2003-2006

(Figure A)
(Figure B)
4. Remove (6) Allen screws from
radio/climate control trim panel
and (1) Phillips screw at the
bottom of the panel.
5. Unplug electrical connectors and
remove the panel. (Figure D)
6. Remove (4) screws securing
the radio. Disconnect and remove
the radio.
Continue to kit assembly, page 10
8
(Figure C)
(Figure D)