INSTRUCTION MANUAL CODE 80234 REV C
20 cm
20 cm
J
.P. SELECTA s.a.u.
3.2 Risks that the Operator can be Subjected to
•
Possibility of touching surfaces that are over 60ºC.
•
Electrical risk
3.3 Qualified Users
This equipment must only be used by qualified personnel.
This equipment must only be used by personnel that has read and understood this
manual.
3.4 Modifications
Modifications of the safety devices are not allowed by the manufacturer and may
cause unexpected risks.
DO NOT OPEN THE DOOR OR TOUCH THE GLASS
DOOR DURING THE STERILIZATION PROCESS
4 Description
The external enclosure is epoxy coated and it has a thermal isolation around the
chamber. The chamber is made of stainless steel with shelves which can be easily
removable, for an easy clean. It has a double door, an inner one made from tempered
glass with a silicone join and another external door with a magnetic lock and a heating
system to avoid condensations.
Users will be doctors or their assistants under their supervision.
The incubator has a CO
control panel to test the CO
Electronic control of the temperature and of the CO
constant at 98% produced by the evaporation of the water inside the optional tank.
5 Installation
Once the equipment is unpacked, make a visual inspection, check the packing list
and make sure that the equipment does not got any damages during the transport.
Keep the packing for some days just in case it was necessary to return the equipment.
5.1 Suitable Placement
Place the equipment on a leveled and flat surface, enough strong to support its weight,
leaving a free space of 20 cm around the incubator.
20 cm
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: www.jpselecta.es
November 2017
(It can be modified without notice)
inlet with a microfilter on the rear part. And an outlet on the
2
concentration.
2
concentration. Humity level
2
Tel 34 93 770 08 77 Fax 34 93 770 23 62
Page: 15