Cleaning Co2 Regulation Jet - J.P. SELECTA Incubator CO2 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80234 REV C
6
J
.P. SELECTA s.a.u.
Noviembre 2017
10.3 Cleaning CO
If the incubator is not able to achieve the desired CO
in the bottle and the valve itself, you should proceed to clean the jet:
- Loosen the CO
- Extract the part with the regulation jet.
- Dismantle the regulation jet from the inlet part.
- Clean the CO
way that the CO
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso) Pag.: 22
Regulation Jet
2
inlet with a spanner.
2
regulation using a thin wire (<0.2mm) or pressured air in counter
2
in the normal use. As indicated on the picture.
2
concentration despite any CO
2
Tel 34 93 770 08 77 Fax 34 93 770 23 62
2