SATA STV Serie Manual Del Uso página 59

中文
EN DE RU KO PT JA ES
96473/96474
G area is the set tolerance display area for input of the set value of the torque tolerance and feedback from the torque tester in real
time. The default torque tolerance is 3%.
Setting Tolerance: Tolerance to Determine whether Peak Torque is Qualified（Note that the determination tolerance of the torque tester
can only be changed by computer software）. The tolerance setting text box is locked, and the tolerance setting itself is a trigger
button. When clicked in general mode, the user name and password are required to be entered （invalid under verification mode） .
When the input is correct, the input box will be unlocked. After entering the tolerance value that you want to change and clicking the
"Write Settings" button to write, the text box will be locked again.
Actual Setting Tolerance: Setting Tolerance Value Feedback Real-time from Torque Tester.
Area H has five operation buttons.
Display Number: This button is a switch button, which can switch the calibration value recorded in E area between value and percentage.
59