SATA STV Serie Manual Del Uso página 60

中文
EN DE RU KO PT JA ES
96473/96474
Clear Data: This button is used to clear the currently saved historical data in Area E and to calibrate the current calibration to restart.
Sensor information: This button is used to enter the sensor information interface of the torque tester. The user needs to be verified
when entering the interface. After entering, the specific parameters of the sensor can be viewed （write permission is limited to SATA
manufacturers）.
Export Report: This button is used to export the detection data stored in E area to the record folder of D or C disk. Note: Record folders
need to be created by users themselves, and can be placed in the root directory of C or D disks. In general mode, as long as more than
one set of test data is generated, the report can be exported. In verification mode, the multi-stage detection of the selected type wrench
needs to be completed before the report can be exported.
Exit program: This button is used to exit the SATA TorqueTester software. After clicking, there will be a dialog box asking whether to
confirm the exit program, select " 是 "to exit directly, and select " 否 "to return to the current running program.
60