SATA STV Serie Manual Del Uso página 65

3） Select the type of wrench to be tested in the wrench selection drop-down box. In this case, select 96306 edited before, and enter
the wrench serial number 618040381 in the serial document box. If you do not input any serial number, the number of times of
preloading will not decrease and there will be no data record in the E area.
4） Set the torque of the torque wrench to 10Nm indicated by the yellow area and pre-press it three times until the value of the
remaining valid number is 0.
96473/96474
中文
EN DE RU KO PT JA ES
65