Ce" Compliance Declaration; Important Safeguards; Improper Use; Electrical Connection - Santos N 43 Manual De Utilización Y De Mantenimiento

"CE" COMPLIANCE DECLARATION

SANTOS SAS - 140-150, Av. Roger Salengro 69120 VAULX-EN-VELIN (LYON) FRANCE
HEREBY DECLARES THAT THE MACHINE DESIGNATED ON THE IDENTIFICATION PLATE AFFIXED:
• UNDER THE APPLIANCE,
• ON THE WARRANTY CERTIFICATE ON THE LAST PAGE OF THIS MANUAL,
COMPLIES WITH THE PROVISIONS OF THE "machines" DIRECTIVE n° 2006/42/CE
AND THE NATIONAL LEGISLATION TRANSPOSING IT.
IT ALSO COMPLIES WITH THE PROVISIONS OF THE FOLLOWING EUROPEAN DIRECTIVES:
No. 2006/95/EC (Low voltage directive)
No. 2004/108/EC (CEM directive)
No. 2002/95/EC (RoHS directive)
No. 2002/96/EC (WEEE directive)
The machine complies with the provisions of the following harmonized European standards:
NF EN ISO 12100-1 and 2:2004: Machine safety devices - General design principles
NF EN 60204-1:2006: Machine safety devices - Machine electrical equipment -General regulations
NF EN 60335-1:2003 Safety of household and similar electrical appliances
SIGNED IN VAULX-EN-VELIN ON: 01/01/2010
SIGNATORY'S TITLE: CHIEF EXECUTIVE OFFICER
SIGNATORY'S NAME: AURELIEN FOUQUET
SIGNATURE

IMPORTANT SAFEGUARDS

When using, cleaning or maintaining the machine, always follow these instructions:
Read all instructions
Note: For easier understanding of the sections below, please refer to the diagrams at the end of the manual

IMPROPER USE

1. Do not use this appliance for grinding anything other than roasted coffee beans.
2. Never operate the appliance with no coffee beans in the bean container.
3. Remove from the coffee beans any foreign bodies which may damage the grinding wheels (metal
staples, stones, etc.).
4. For electrocution risk protection reasons, never plunge the base into water or any other liquid.
5. Never touch the moving parts.
6. Never operate the appliance with no coffee beans in the bean container.
7. Unplug the appliance before carrying out any work on it: cleaning, maintenance or repair.
8. The use of spare parts other than certified SANTOS original parts is prohibited.

ELECTRICAL CONNECTION:

• The electric power supply for the machine is available in 3 single-phase voltages:
- 110-120 V 50/60 Hz
- 220-240 V 50 Hz
- 220-240 V 60 Hz
Line protection: the machine should be connected to a standard 2-pole + earth electric socket. The installation should be
fitted with an RCD and a fuse rated at 16A. The appliance must be earthed.
CARE:
• Before connecting the machine, check that the mains electrical voltage is the same as the voltage for
your appliance. Its value is shown:
• If the power cable is damaged, it should be replaced by a special unit available from SANTOS or from approved
SANTOS dealers.
98143 US 3.0 - 07/2010
THE MANUFACTURER:
either on the identification plate under the machine.
or on the identification plate on the last page of this manual.
8
www.santos.fr