Bunn Speed Brew Manual Del Usuario página 20

Close Lid. Empty Carafe when liquid stops flowing.
Flip the Tank Switch to the OFF position and unplug.
Allow vinegar to sit in the brewer for at least 2 hours.
Remove the Brew Funnel and unscrew the Sprayhead.
Check Sprayhead holes and clear any deposits
with toothpick.
Clean Sprayhead with a cloth and dish soap. Rinse
with water.
Pour a Carafe of fresh water into brewer. Place empty
Carafe on Warmer Plate and reinsert Brew Funnel.
Close Lid (the water will begin to flush out the vinegar
from the Internal Hot Water Tank).
20
Empty Carafe when water has stopped flowing.
Repeat the process of cycling fresh cold water 3 or
more times or until you no longer smell vinegar.
Remove Brew Funnel and reattach Sprayhead.
Replace Brew Funnel and place Carafe on Warmer
Plate. Plug in. Position Tank Switch to the ON position.
Allow water in tank to reach brewing temperature.
Which should take about 15 minutes.
Then brew away.