Replacing The Light Bulb; Replacing The Light Bulb On The Underside Of The Sewing Arm - Janome 1600P QC Manual De Instrucciones

Replacing the Light Bulb

CAUTION:
Turn the power off before replacing the light bulb.
The bulb could be HOT, wait until it has cooled down before
touching it.
q Setscrew
w Face cover
e Lamp socket
r Light bulb
To remove:
Remove the setscrew q.
Remove the face cover w.
Pull out the bulb r from the lamp socket e.
To replace:
Insert a new bulb into the opening of the socket e.
Attach the face cover w with the setscrew and cap.
Replace the bulb with the same type, rated 12 V, 5 W.

Replacing the Light Bulb on the Underside of the Sewing Arm

Lay the machine on its back.
Detach the lamp window q from the machine with the
screw driver as shown.
Pull out the light bulb e from the socket.
Insert a new bulb into the socket w.
Attach the lamp window q into the opening on the
machine.
q Lamp window
w Lamp socket
e Light bulb
Replace the bulb with the same type, rated 12 V, 5 W.
w
q
r
q
w
38
e
e
q