Safety Advice Concerning Modifications / Accessories - SCHUBERTH M1 DOT218 Manual De Usario

Safety Advice concerning modifications / accessories

Do not modify your helmet.
Original parts (especially on the outer shell, inner shell and retention system) must
not be modified or removed. The fitting of non-genuine, non-recommended parts can
partially or completely counteract the protective function of the helmet and invalidate
the DOT approval with all guarantee and insurance claims.
Use only original parts.
Use only replacement parts and accessories expressly made for your helmet by
SCHUBERTH!
Never modify your helmet!
It is very dangerous to drill holes or to cut the shell and/or the shock absorbing liner.
Modification can seriously weaken the helmet. Modifying the retention system weakens
it, increasing the likelihood of snapping during impact.
Do not repaint the helmet!
Repainting of your helmet is not recommended. Paint and thinner can damage the
helmet and reduce its ability to provide head protection in an accident.
4. MAINTENANCE AND CARE
OUTER SHELL
Never use motor fuel, thinners, glass cleaner or other solvents to clean the helmet!
Your helmet can be seriously damaged by these substances without visible damage.
A helmet damaged or weakened by a cleaning agent may not provide head protection
in an accident resulting in serious personal injury or death!
Never use hot or salt water to clean the helmet. Your helmet can be seriously damaged
by this treatment without damage being visible to you.
8
EN
9