Software Functions; Installation And Data Transmission - Microlife BP3GX1-5X Manual De Instrucciones

6. Software functions

This unit can be used in connection
with your personal computer (PC)
running the PC Link blood pressure
analyzer software. Your PC will allow
a capacity of monitoring 80 patients,
each with 1000 data (note: overuse
will lower system efficiency). The
memory data can be transferred to the
PC by connecting the monitor via the
included USB cable.
Note: The software does not work with
Mac computers.

6.1. Installation and data transmission

a) Insert CD into CD ROM drive of your PC. The
installation will start automatically. If not,
click on SETUP.EXE.
b) Connect the monitor via USB cable with the
PC. Three horizontal bars will appear on the
display and last for 3 seconds.
c) The bars will then flash to indicate that the
connection between computer and device is
successfully made. As long as the cable is
plugged, the bars will keep flashing and the
buttons are disabled.
During the connection, the device is completely
controlled by the computer. Please refer to the
"Help" file in the software for detailed instruc-
tions or call 1-800-568-4147.
18