Harbor Breeze E-BFT52CB5C1 Manual Del Usuario página 13

FINAL INSTALLATION
2. Partially insert three blade screws (BB), along with
three blade washers (DD), to attach one blade arm
(G) to a blade (H). Then, tighten each blade screw
(BB) starting with the one in the middle. (Fig. 2)
Repeat with remaining blades (H).
3. Insert two motor screws (AA), along with lock
washers (CC), through one blade arm (G) to
attach blade arm (G) to motor. Tighten motor
screws (AA) securely. (Fig. 3) Repeat with
remaining blade arms (G), making sure to
completely secure each blade arm (G) before
proceeding with the next.
4. If you wish to use the light kit, remove
three screws from top of light kit fitter (D).
Remove finial (L), finial plate (K), and white
washer from bottom of light kit fitter (D). (Fig. 4)
Save finial (L), finial plate (K), and white washer
for later use. [Continue to Step 5.]
If you do NOT wish to use the light kit,
please go to section entitled "Using Fan Without
Light Kit" on page 15.
Hardware Used
3/16 Blade Screw
BB
DD
Blade Washer
Hardware Used
Motor Screw
AA
CC
5.4 M/M Lock Washer
Threaded
13
Fig. 2
BB
DD
G
x 15
x 15
Fig. 3
E
G
CC
AA
x 10
x 10
Fig. 4
D
White
Washer
Rod
K
L
H
H