Installing The Interface - Axxess AX-ADCH100 Instrucciones De Instalación

Applications
CHRYSLER DODGE
300 2005-2007 Magnum
Ram 1500
Aspen 2007
DODGE
Ram 2500/3500
Caliber 2007-2008 2006-2009
JEEP
Charger 2006-2007
Dakota 2005-2007 Commander
Durango 2004-2007 Compass
CHRYSLER DODGE
200 2011-up Journey
300 2008-2010 Magnum
Aspen 2008-2009 Nitro
Sebring 2007-2010 Ram 1500
Town & Country Ram 2500/3500
2008-up
DODGE Ram Chassis Cab
Avenger 2008-up JEEP
Caliber 2009-2012 Commander
Challenger 2008-up Compass
Charger 2008-2010 Grand Cherokee
Dakota 2008-2011
Durango 2008-2013 Liberty
Grand Caravan 2008-up Patriot
AX-ADCH01 (A)
JEEP
(continued) (continued)
2005-2007 Grand Cherokee
2006-2008
Patriot
MITSUBISHI
Raider
2006-2007
2007-2008
AX-ADCH02 (B)
JEEP
(continued) (continued)
2009-2010 Wrangler
2008-2009
MITSUBISHI
2007-2011
2009-2011 Raider
RAM
2010-2011 1500/2500/3500
2011
Chassis Cab
2008-2010 3500/4500/5500
2009-up C/V Tradesman
2008-2013 vOLkSWAGEn
2008-2012 Routan
2009-up
AX-ADCH100

Installing the Interface

AX-ADCH01 Harness
From the 16-pin harness
2005-2007
• Connect the (2) Red wires to the ignition/accessory wire of the aftermarket radio.
2007-2008
• Connect the Orange/White wire to the illumination wire of the aftermarket
2006-2007
radio. If the aftermarket radio does not have an illumination wire, tape off the
Orange/White wire.
• Connect the Blue/White wire to the amp turn on wire of the aftermarket radio.
• Connect the Brown wire to the mute wire of the aftermarket radio. If the
aftermarket radio does not have a Mute wire, tape up the Brown wire.
2007-up
• Connect the White wire to the left front positive speaker output of the
aftermarket radio.
2008-2009
• Connect the White/Black wire to the left front negative speaker output of the
aftermarket radio.
2012-2012
• Connect the Gray wire to the right front positive speaker output of the
2012
aftermarket radio.
2012-up
• Connect the Gray/Black wire to the right front negative speaker output of
the aftermarket radio.
2009-2013
2