Operation - Home Decorators Collection 91176 Guía De Uso Y Cuidado

Assembly - Assembling the Fan Without the Light Kit
7
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
In order to use the fan without light kit, remove the switch
cup cover (WW) from the top of the light kit fitter assembly
(D) by removing the center hex nut inside the switch cup
cover (WW) off of the threaded nipple on the top of the light
kit fitter assembly (D).
□
Press the plastic plug (CC) into the center hole of the switch
cup cover (WW).
□
Remove the three screws (TT) on the switch cup cover (WW).
□
Align the three holes in the switch cup cover (WW) with the
three holes in the switch cup of the fan-motor assembly (B).
Make sure the notch in the switch cup cover (WW) clears the
slide switch in the switch cup of the fan-motor assembly (B).
□
Re-install the three screws (TT) that were removed in first
step to secure the switch cup cover (WW).

Operation

NOTE: Wait for the fan to stop before reversing the direction of the
blade rotation.
Turn on the power and check the operation of the fan. The pull
chain controls the fan speeds as follows:
1 pull - High, 2 pulls - Medium-High, 3 pulls Medium-Low, 4 pulls
Low, 5 pulls - off
The appropriate speed settings for warm or cool weather depends
on factors such as the room size, ceiling height, and number of
fans.
The slide switch (XX) controls the direction of the blades: forward
(switch left) or reverse (switch right)
Warm weather - (Forward) A downward airflow creates a cooling ef-
fect. This allows you to set your air conditioner on a warmer setting
without affecting your comfort.
Cool weather - (Reverse) An upward airflow moves warm air off of
the ceiling. This allows you to set your heating unit on a cooler set-
ting without affecting your comfort.
B
WW
DD
11
Please contact 1-800-986-3460 for further assistance.
TT
CC
XX
XX
HOMEDEPOT.COM/HOMEDECORATORS